Covers for cars, ATVs, snow mobiles

Cars, motorcycles, ATVs, snow mobiles are expensive equipment and you are probably interested in keeping it serviceable and maintaining its good appearance for years to come. Rain, dust and active sun are not good for either paintwork, plastic, or other parts of our equipment.

The FLEXIBON plant develops and manufactures covers and shelters for your nurslings.

What cover to select?

Two types of protecting covers are distinguished:

Parking cover – intended for permanent or seasonal storage of an ATV, car, motorcycle or snowmobile. There is also an indoor “garage” option and an outdoor option. The material for this type of covers is durable, waterproof and wear-resistant, but sufficiently light fabric, which should also pass air through in order to avoid condensation. At our production, specialists have decided on such materials as: Poly300D Rip Stop and Oxford 240D or 600D PU 2000. Designation “D” – means the density of the material in DEN. The higher the “D” value, the denser and heavier the fabric.

PU – polyurethane coating ensures the fabric waterproofing. The number 2000 indicates that the fabric can withstand the water pressure corresponding to 2000mm water column.

Unlike the more affordable Oxford fabric, Poly300D Rip Stop is reinforced with a reinforcing thread that provides tear resistance along the grain.

All seams on the cover are stitched with strong reinforced threads. The drawstring elastic band at the bottom ensures a good fixing of the product on the equipment.

Attention! The parking cover shall not be used when transporting equipment on an open trailer or in the body of an uncovered vehicle.

Covers for cars, ATVs, snow mobiles
Covers for cars, ATVs, snow mobiles

Available cover fabrics and colours

Covers for cars, ATVs, snow mobiles

Poly Rip Stop 600D

Covers for cars, ATVs, snow mobiles

Poly Rip Stop 600D

Covers for cars, ATVs, snow mobiles

Poly Rip Stop 300D

Transportation cover – is designed to protect equipment during transportation on open trailers to protect it from dust, dirt and precipitations. The material for this type of covers should be denser and have increased wear resistance, since the fabric is exposed to increased wind loads during transportation. As a rule, we use Poly600D Rip Stop fabric for the manufacture of this type of covers.

There are covers that completely cover the entire ATV, and there are models that only cover the body, while leaving the wheels open. This is implemented to prevent the cover get soiled in the continuous operation of the equipment, because ATV wheels are often dirty after the off-road driving.

The FLEXIBON plant offers you ready-made covers, the available sizes are M, L, XL or order an original cover according to your wishes.

At the request of the customer, our company can produce a version of a heat-insulated parking cover with a frame, which will serve as a mini-garage for your equipment and will help keep the engine and seats warm in the cold season, for a certain period of time.