Shock-absorbing tape – Non-cross-linked PE foam tape
Shock-absorbing, edge or damping tape is PE foam representing a strip of various lengths and widths depending on the customer needs. It is applied in the design of concrete floor. It is applied to compensate for thermal expansion and allows avoiding the contact between the floating slab and the walls.
Technical specifications:
| Parameter | Units | Value |
|---|---|---|
| Apparent density | kg/m3 | 19 – 37 |
| Tensile strength | kPa | 80 – 100 |
| Elongation at break | % | 280 – 320 |
| Compression strain | % | ≤ 25 |
| Heat conductivity factor | W/m*К | 0,0041 |
| Water absorption by volume | % | ≤ 3 |
| Limit application temperature: | ||
| Minimum temperature | 0С | -60 |
| Maximum temperature | 0С | +85 |
Standard sizes:
| Name | Size (mm*mm*mm) | Number of r.m in package |
|---|---|---|
| Shock-absorbing tape | 8*100*15 / 8*100*25 | 15 / 25 |
| Shock-absorbing tape | 10*100*15 / 10*100*25 | 15 / 25 |
Table specifies standard sizes, manufacture according to the customer specification is also possible.