Reflecting insulation

Reflecting insulation

It is the insulation type possessing higher factor of reflection from own surface. Due to this property it is capable of retaining both heat and cold to the maximum extent, and effectively separating media with different temperatures.

The reflective insulation has a number of properties such as low weight and thickness, installation simplicity, durability and environmental safety. A unique material represents a combination of two, three or more layers depending on the task to be solved by the customer. It is produced both in rolls and in sheets. For the installation simplicity, especially for complex shapes, an adhesive layer may be applied on one side.

The options of the reflective layer are also variable: mainly, these are the lavsan film and aluminium foil. As a manufacturer, our company possesses a number of opportunities for solving the issues occurring in the application of the reflecting insulation.

FLEXIBON FF – Alu-foil non-cross-linked polyethylene foam.

The material is manufactured based on polyethylene foam laminated with foil. As opposed to the lavsan non-cross-linked PE foam, the alu-foil non-cross-linked PE foam has a higher limiting application temperature, however, the material is more durable and corrodible. It is intended for the internal and external heat- steam- and water insulation. Heat insulation of all the types of buildings and structures, floors, ceilings, walls, roofings, attics in living, administrative and production premises, heating, hot and cold water supply systems, ventilation and air conditioning systems, cooling and chilling chambers, tanks and containers, air ducts, baths and saunas and etc.

Technical specifications:

Indicator Meas. unit Value
Surface density g/m2 0,8-2,6
Heat conductivity factor W/m*К 0,0037-0,052
Vapor permeability mg/m*h*Pa 0,001
Sound absorption factor at 1000 Hz 0,4-0,6
Compression strain % ≤ 20
Limit application temperature:
Minimum temperature 0С -60
Maximum temperature 0С +100

Standard sizes:

Name Size (mm*mm*mm) Number of s.m in package
Flexibon FF 2 2*1000*50 50
Flexibon FF 3 3*1000*50 50
Flexibon FF 4 4*1000*50 50
Flexibon FF 5 5*1000*50 50
Flexibon FF 8 8*1000*30 30
Flexibon FF 10 10*1000*30 30

Table specifies standard sizes, manufacture according to the customer specification is also possible.

FLEXIBON FL – Non-cross-linked PE foam with lavsan.

The material is manufactured based on polyethylene foam laminated with metallized film with aluminium spray coating (polyethylene terephtalate, PET or lavsan). It is intended for the internal and external heat-, steam- and water insulation. It is applied for heat insulation of all the types of buildings and structures, floors, ceilings, walls, roofings, attics in living, administrative and production premises, heating, hot and cold water supply systems, ventilation and air conditioning systems, cooling and chilling chambers, tanks and containers, air ducts, baths and saunas and etc. Wide opportunities of usage are conditioned by the properties of polyester: frost resistance, low steam and gas impermeability, wear and fracture resistance.

Reflecting insulation

Technical specifications:

Indicator Meas. unit Value
Surface density g/m2 0,8-2,6
Heat conductivity factor W/m*К 0,0037-0,039
Vapor permeability mg/m*h*Pa 0,001
Sound absorption factor at 1000 Hz 0,4-0,6
Compression strain % ≤ 20
Limit application temperature:
Minimum temperature 0С -60
Maximum temperature 0С +85

Standard sizes:

Name Size (mm*mm*mm) Number of s.m in package
Flexibon FL 2 2*1000*50 50/25
Flexibon FL 3 3*1000*50 50/25
Flexibon FL 4 4*1000*50 50/25
Flexibon FL 5 5*1000*50 50/25
Flexibon FL 8 8*1000*30 30/15
Flexibon FL 10 10*1000*30 30

Table specifies standard sizes, manufacture according to the customer specification is also possible.

FLEXIBON FLL – Non-cross-linked PE foam coated with lavsan on both sides.

The material is based on polyethylene foam laminated on both sides with a high-performance metallized film with aluminium spray coating (polyethylene terephthalate, PET or lavsan). This coating is applied on both sides, it expands the range of use. This material may be applied for cooling chambers, which should not pass heat on one side and cold on the other side. It is a reflective heat insulator, which can be applied for separating partitions, if particular temperature should be maintained in different premises.

Technical specifications:

Indicator Meas. unit Value
Surface density g/m2 0,8-2,6
Heat conductivity factor W/m*К 0,0037-0,039
Vapor permeability mg/m*h*Pa 0,001
Sound absorption factor at 1000 Hz 0,4-0,6
Compression strain % ≤ 20
Limit application temperature:
Minimum temperature 0С -60
Maximum temperature 0С +85

Standard sizes:

Name Size (mm*mm*mm) Number of s.m in package
Flexibon FLL 2 2*1000*50 50/25
Flexibon FLL 3 3*1000*50 50/25
Flexibon FLL 4 4*1000*50 50/25
Flexibon FLL 5 5*1000*50 50/25
Flexibon FLL 8 8*1000*30 30/15
Flexibon FLL 10 10*1000*30 30
Flexibon FLL 20 10*1000*2 2

Table specifies standard sizes, manufacture according to the customer specification is also possible.

FLEXIBON FLG – Non-cross-linked PE foam with lavsan and an adhesive base.

The material is manufactured based on PE foam, laminated with a high-efficient metallized film with aluminium spray coating (polyethylene terephtalate, PET or lavsan) and an adhesive base. It is intended for the internal and external heat-, steam- and water insulation. It is applied for heat insulation of all the types of buildings and structures, floors, ceilings, walls, roofings, attics in living, administrative and production premises, heating, hot and cold water supply systems, ventilation and air conditioning systems, cooling and chilling chambers, tanks and containers, air ducts, baths and saunas and etc. Wide opportunities of usage are conditioned by the properties of polyester: frost resistance, low steam and gas impermeability, wear and fracture resistance. This material is provided with an adhesive layer allowing to apply it on geometrically complex multitier, spherical and cylindrical surfaces. The adhesive base considerably simplifies the insulation installation process and allows saving your time and money.

Reflecting insulation

Technical specifications:

Indicator Meas. unit Value
Surface density g/m2 0,8-2,6
Heat conductivity factor W/m*К 0,0037-0,039
Vapor permeability mg/m*h*Pa 0,001
Sound absorption factor at 1000 Hz 0,4-0,6
Compression strain % ≤ 20
Limit application temperature:
Minimum temperature 0С -60
Maximum temperature 0С +85

Standard sizes:

Name Size (mm*mm*mm) Number of s.m in package
Flexibon FLG 2 2*1000*50 50/25
Flexibon FLG 3 3*1000*50 50/25
Flexibon FLG 4 4*1000*50 50/25
Flexibon FLG 5 5*1000*50 50/25
Flexibon FLG 8 8*1000*30 30/15
Flexibon FLG 10 10*1000*30 30

Table specifies standard sizes, manufacture according to the customer specification is also possible.

Delivery to Samara region

We will organize delivery to your storage house. We operate in Russia and abroad. Own fleet of vehicles, transportation companies, container transportation. Responsibility, insurance, optimal price.

Material cutting by sizes

Use the unique possibility to buy materials in sizes necessary for you. By width, length and even shape. Do not pay for excessive square meters! Fill in the request and save your time and money!

Also we produce: