FLEXIBON F – Non-cross-linked PE foam
Non-cross-linked polyethylene foam represents a foamed fibre with a porous but dense gas-filled structure obtained by foaming polyethylene with a gas mixture. It is referred to the category of thermoplastic polymers (thermoplastics) performing as excellent steam, moisture, heat and noise insulators.
Non-cross-linked PE foam is a universal insulation building material widely used in wall, ceiling, floor, piping, HVAC insulating works. Moreover, the non-cross-linked PE foam has proved itself as an excellent packing material for a wide variety of items: from domestic appliances to food products.
Technical specifications:
| Parameter | UnitS | Value |
|---|---|---|
| Apparent density | kg/m3 | 19-37 |
| Tensile strength | kPa | 80-100 |
| Elongation at break | % | 280-320 |
| Compression strain | % | ≤ 25 |
| Heat conductivity factor | W/m*К | 0,041 |
| Water absorption by volume | % | ≤ 3 |
| Limit application temperature: | ||
| Minimum temperature | 0С | -60 |
| Maximum temperature | 0С | +85 |
Standard sizes:
| Name | Size (mm*mm*mm) | Number of s.m in package |
|---|---|---|
| Flexibon F1 | 1*1050*200 | 210 |
| Flexibon F2 | 2*1050*50 | 52,5 |
| Flexibon F3 | 3*1050*50 | 52,5 |
| Flexibon F4 | 4*1050*50 | 52,5 |
| Flexibon F5 | 5*1050*50 | 52,5 |
| Flexibon F8 | 8*1050*30 | 31,5 |
| Flexibon F10 | 10*1050*30 | 31,5 |
The length and width of the roll may be manufactured according to the manufacturer’s terms of reference, the possible width is from 800 to 1600 mm.
FLEXIBON FG – Non-cross-linked PE foam with an adhesive layer
ЭIt is a universal insulating building material widely used for insulation of walls, ceiling, floor, piping, HVAC systems. This material is essential in geometrically complex multilayer, spherical and cylindrical surfaces. The adhesive base considerably simplifies the insulation installation process and allows saving your time and money.
Technical specifications:
| Parameter | Units | Value |
|---|---|---|
| Apparent density | kg/m3 | 19-37 |
| Tensile strength | kPa | 80-100 |
| Elongation at break | % | 280-320 |
| Compression strain | % | ≤ 25 |
| Heat conductivity factor | W/m*К | 0,041 |
| Water absorption by volume | % | ≤ 3 |
| Limit application temperature: | ||
| Minimum temperature | 0С | -60 |
| Maximum temperature | 0С | +85 |
Standard sizes:
| Name | Size (mm*mm*mm) | Number of s.m in package |
|---|---|---|
| Flexibon FG 2 | 2*1000*50 | 50 |
| Flexibon FG 3 | 3*1000*50 | 50 |
| Flexibon FG 5 | 5*1000*50 | 50 |
| Flexibon FG 10 | 10*1000*30 | 30 |